您好,欢迎访问公司官网,我们将竭诚为您服务!
超高压陶瓷电容器 脉冲陶瓷高压电容器生产厂家  |  东莞市美志电子有限公司

技术支持:

13549300303
产品分类

更多>>

联系我们

全国技术总工

何先生: 13549300303

销售总监:

李小姐: 13649800104

国内销售热线:

河南区——曾小姐:189 3859 1090

浙江区——谢小姐:18073076348

企业渠道:

电   话:  0769-22384059

阿里诚信通店铺:mzcap.1688.com

总部:东莞市东城街道莞樟路东城段57号

厂址:湖南省岳阳市平江县平江高新技术产业园区135标准厂房第二栋


商务合作

美志欢迎电力行业企业,行业专家人士与美志开展如技术合作,共同研发等商务合作,具体合作细节欢迎咨询 李总:136 4980 0104




详细信息当前位置:首页 -> 高压瓷片电容器
Y5U材质高压瓷片电容
名称:Y5U材质高压瓷片电容
发布时间:2019-08-07 17:31:11点击率:
详细信息

产品特性Features

低损耗Low dissipation factor of 1% at 1 KHZ

高频特性High frequency ≥100KHZ

过大电流High current ≥15mA

高压特性好High voltage ≥2Un(额定电压)

绝缘电阻大High insulation resistance ≥100000MΩ

使用寿命长Long life ≥10 years

用途Applications

适用于高频高压电源High frequency & high voltage power supplies;

激光CO2 lasers, high voltage pulse generator

X光机电源X-ray equipment

无损探伤检测NDT (Non-destructive testing)

机场安检设备Airport security equipment

负离子产品negative ion products / anion products

陶瓷温度特性Ceramic dielectric properties



外观尺寸Dimension & Lead Style:












订购产品说明Ordering Information



规格型号释义Explanationt of part numbers:






关于Y5U(About  Y5U ceramic)

Y5U材质是一种性能较好的II类通用陶瓷,当温度在-25°C到+85°C时其容量变化为+22/-33%,介质损耗小于1%,绝缘电阻大于100000MΩ。

Y5U is a better performance of Class II General Ceramics.Its temperature variation of capacitance is within +22/-33% from -25°C to +85°C. Dissipation factor is less than 1%, insulation resistance greater than 100000MΩ.







注意事项 PRECAUTIONS

(1)运输和储存:

•请避免在高温或高湿度或淋雨状态下运输或储存电容。

•不要放置在有毒气体,如硫酸,盐酸,硝酸等。

•避免碰。

(2)在操作过程中:

•避免接触,如汗液电解质。不要赤手触摸。

•避免过多的影响,如坠落造成。

•请勿焊接螺柱端子。

•不要再机终端。

(3)用法:

•当电容器用于高速脉冲,如激光,确保外加电压(峰 - 峰值电压),电容器的额定规格内。

•确保电容不暴露辐射室或变压器。



(1) During transportation and storage

• Do not transport or store where the capacitor will be exposed to high temperature or high humidity.

• Do not expose to poisonous gases such as H2SO4, HCL or HNO3.

• Avoid excessive impact such as that caused by falling.

(2) During operation

• Avoid contact with electrolytes such as perspiration. Do not touch with bare hands.

• Avoid excessive impact such as that caused by falling.

• Do not apply solder to stud terminals.

• Do not re-machine the terminals.

(3) Usage

• When the capacitor is used for high-speed pulses such as with a laser, make sure that the impressed voltage (peak-to-peak volt-age) is within the capacitor’s rated specifications.

• Make sure that the capacitor is not exposed to radiant heat from cham


    

东莞市美志电子有限公司 版权所有©Copyright 2018 粤ICP备19009215号

技术支持:东莞网站建设